V type Emulsion scoop coater

Application:

A necessary tool for proper application of all direct liquid emulsions. We have the best designed emulsion scoop coaters in the screen printing industry. They are designed for easy and comfortable handling while providing a smooth layer of emulsion on your screen. The coating angle is designed on a perfect angle. It's calibrated to give you a perfect coating of emulsion every time.

Feature:

· Made of durable aluminum with plastic end cap guides.

· Designed for easy grip, application, and clean-up.

· With pro-angle coat a emulsion layer evenly and uniformly to ensure a smooth layer on the screeen.

FILL THE COATER: Under a safe yellow light source, pour emulsion from its container . Allow the emulsion to flow out to an even level. Make sure you have enough to coat in one stroke.

COAT THE SCREEN: Use the rounded edge of a scoop coater to apply an even coat of emulsion in one pass. The coater should be at least two inches shorter that the narrow width of your screen. Apply one coat of emulsion to the printing side, then one coat on the squeegee side. Dry the screen thoroughly.

CLEAN THE COATER: Scrape extra emulsion back into its container. Cover the container. Wash out remaining emulsion with water. Any remaining emulsion that dries in the coater can be very difficult to remove. Store the coater where the edged can't be nicked.

Aluminum Emulsion scoop coater

Stainless steel Emulsion scoop coater